Skip to main content
National MagLab logo

The MagLab is funded by the National Science Foundation and the State of Florida.

NSF Grant Funds New 40T Superconducting Magnet Design

Published October 03, 2021

Designing on paper
Designing on paper

Stephen Bilenky

The world's next most powerful superconducting magnet will be designed at the National High Magnetic Field Laboratory.

Contact: Kristin Roberts

TALLAHASSEE, Fla. — A new $15.8 million grant from the National Science Foundation (NSF) will produce a detailed design for the world's most powerful superconducting magnet at the Florida State University-headquartered National High Magnetic Field Laboratory. While the National MagLab is already home to more than a dozen world-record magnets used by researchers from around the world, the future 40-tesla magnet will advance the study of quantum matter with its low-noise environment that surpasses present-day resistive and hybrid magnets.

"This project is a fantastic example of how science works on the edge of our understanding: engineers will design a new instrument that has never been built before that holds the promise to become a state-of the-art tool for physicists to answer outstanding research questions about the mysteries of quantum materials," explained Greg Boebinger, MagLab director and co-PI on the grant. "Our user community is excited about the virtually limitless time at peak field and low noise environment this future magnet, once constructed, would provide to advance their research goals."

The design for a new 40T magnet will call for the use of cutting-edge materials known as high-temperature superconductors, which allow a near perfect flow of electrons at higher temperatures than their earlier low-temperature counterparts. To put this magnet design in perspective, a typical refrigerator magnet has a field of about .01 T and low-temperature superconductors have a maximum field of 25T.

Dozens of researchers within the lab's Magnet Science and Technology department and Applied Superconductivity Center will bring their unique expertise in materials research, magnet design and technology development to this new project. The MagLab’s demonstrated successes in magnet research and development include two recent breakthroughs in HTS technology: a 32-tesla all-superconducting magnet that was designed, built and reached full field at the MagLab in December 2017 and a 14.5 tesla test coil that reached a world record 45.5 tesla field strength inside a 31-tesla resistive magnet.

"Magnets are only as good as the materials and technologies in which they are built," said Mark Bird, director of the Magnet Science and Technology division at the National MagLab. "A magnet like this can only be achieved at the National MagLab where we are leading a revolution in understanding and leveraging high-temperature superconductors."

The 40T team includes a diverse mix of engineers, technicians, machinists, researchers and other experts from across the lab.

The 40T team includes a diverse mix of engineers, technicians, machinists, researchers and other experts from across the lab.

For the final design, MagLab scientists and engineers are considering two different magnet technologies using the high-temperature superconductor known as “rare earth barium copper oxide” or REBCO. The two design strategies take different approaches to address inconsistency in the performance of the REBCO tape. One design uses multiple REBCO tapes in parallel, while the other involves applying a resistive insulation to the tape. The team will develop test coils to advance our understanding of screening currents, stress, and quench protection —each one a component of the myriad technical arcana that must be mastered for the future magnet to be successful.

After additional testing and characterization work, MagLab engineers will complete a final design that will describe in complete detail how a 40T superconducting magnet should be constructed, including the cost and schedule for construction.

"The National High Magnetic Field Laboratory's extraordinary work over the past few decades is evident by the fact that they continue to attract support from the National Science Foundation and others to take us even further in magnet development,” said Interim Vice President for Research Laurel Fulkerson. “We are proud of the work they have already done and will continue to do as they develop a design for the 40T magnet."

The grant funds design work through 2026 and is part of the NSF's Mid-scale Research Infrastructure 1 Program (Mid-scale RI-1), special funding that supports the design efforts for compelling projects that meet a scientific need and enable US researchers to remain competitive in a global research environment.

"U.S. researchers need cutting-edge tools to stay at the forefront of science and technology," said NSF Director Sethuraman Panchanathan. "NSF is committed to filling this mid-scale space in the American scientific research infrastructure by investing in research facilities and instrumentation that advance next-generation discoveries."

Success at this stage will lay the groundwork for a future proposal that, if successful, would fund the construction of the 40T magnet and is an important stepping-stone on the route to a future 60T hybrid magnet, one of the most challenging future magnets proposed in national reports on high magnetic field science.

Last modified on 06 February 2023

The National High Magnetic Field Laboratory is the world’s largest and highest-powered magnet facility. Located at Florida State University, the University of Florida and Los Alamos National Laboratory, the interdisciplinary National MagLab hosts scientists from around the world to perform basic research in high magnetic fields, advancing our understanding of materials, energy and life. The lab is funded by the National Science Foundation (DMR-2128556) and the State of Florida. For more information, visit us online at or follow us on Facebook, Twitter, Instagram and Pinterest at NationalMagLab.